EUR 0,00
(toimituskulut: 0,00)
Brilliant Tools BT114900 Digitaalinen skydelære 150 mm
Tuotenumero: [10066971] | Valmistaja: Brilliant Tools | Mallinum: BT114900 | EAN: 4042146778456
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 5-6 työpäivää. Lisätietoja
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
7,02
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
10,03
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
25,60
ilman ALV 20,40
Kokonaishinta sis. toimitus
32,62
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
Ideally suited for interior/exterior and depth measurements
Made of carbon fibre
Quick reading off of the measured values from the digital display
Can be switched from millimetres to inches
With the BRILLIANT TOOLS digital Vernier calliper BT114900, inner and outer diameters as well as gaps and thicknesses between 0 and 15 cm can be determined precisely. The digital Vernier calliper is equipped with two inner measuring surfaces and two opposing outer callipers. The determined value can either be read analogously or via the LCD display. The digital display can be switched from millimetres to inches as needed (measuring range 0” to 6”). The Vernier calliper is made of carbon fibre. Thanks to the compact length of 23.5 cm, there is room for the tool in every tool case. A battery is required to operate the display, and is included in the contents.
Made of carbon fibre
Quick reading off of the measured values from the digital display
Can be switched from millimetres to inches
With the BRILLIANT TOOLS digital Vernier calliper BT114900, inner and outer diameters as well as gaps and thicknesses between 0 and 15 cm can be determined precisely. The digital Vernier calliper is equipped with two inner measuring surfaces and two opposing outer callipers. The determined value can either be read analogously or via the LCD display. The digital display can be switched from millimetres to inches as needed (measuring range 0” to 6”). The Vernier calliper is made of carbon fibre. Thanks to the compact length of 23.5 cm, there is room for the tool in every tool case. A battery is required to operate the display, and is included in the contents.