EUR 0,00
(toimituskulut: 0,00)
Alcasa HDMI Switcher, HDMI, Musta, Metalli, 7680 x 4320, Data, Kulta
Tuotenumero: [10717936] | Valmistaja: Alcasa | Mallinum: GC-M0261 | EAN: 4014619556441
Etävarastossa
Tuotetta on etävarastossamme. Toimitusaika noin 4-5 arkipäivää. Lisätietoja
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
7,02
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
10,03
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
36,27
ilman ALV 28,90
Kokonaishinta sis. toimitus
43,29
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
HDMI 2.1 switch, 2-way (2x input and 1x output), directional, 8K @30Hz, Good Connections®
With the compact HDMI 2.1 switch from Good Connections®, you always have the right solution for connecting two HDMI devices to one screen. The switch is directional and therefore only suitable for the following application scenario:
Application scenario - 2 in / 1 out
Two devices can be connected to one screen. The desired input signal can be selected by pressing the "Select" button. The selected input is represented by a blue LED.
Plug & Play
Connect and get started! Connect the HDMI cables of the signal source(s) and signal sink(s) to the HDMI ports of the switch. Drivers are not required. Normally, no external power supply is necessary. If your existing HDMI devices do not provide enough power to operate the switch, the power supply can be ensured using the USB cable provided.
With the compact HDMI 2.1 switch from Good Connections®, you always have the right solution for connecting two HDMI devices to one screen. The switch is directional and therefore only suitable for the following application scenario:
Application scenario - 2 in / 1 out
Two devices can be connected to one screen. The desired input signal can be selected by pressing the "Select" button. The selected input is represented by a blue LED.
Plug & Play
Connect and get started! Connect the HDMI cables of the signal source(s) and signal sink(s) to the HDMI ports of the switch. Drivers are not required. Normally, no external power supply is necessary. If your existing HDMI devices do not provide enough power to operate the switch, the power supply can be ensured using the USB cable provided.