EUR 0,00
(toimituskulut: 0,00)
ABUS RM1100, Valkoinen, 0 - 95%, -10 - 50 °C, 10.5–13.8V DC, 100 x 100 x 46 mm, 160 g
Tuotenumero: [10719118] | Valmistaja: ABUS | Mallinum: GUD-7312 | EAN: 4043158001303
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 7-9 työpäivää. Lisätietoja
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
Ilmainen toimitus
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
10,03
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
110,68
ilman ALV 88,19
Kokonaishinta sis. toimitus
110,68
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
- For connecting to alarm systems
- Detects temperature changes: 3°C within one minute
- Detects maximum temperature: 60°C
- Can be used in humid spaces
The 12 V raise of heat detector detects incipient fires. It reacts to an excessive maximum temperature and a sudden temperature rise. These indicators are reliably detected and reported to the alarm centre.
The 12 V raise of heat detector is mounted on the ceiling in the centre of the room. The minimum distance to the side wall should be 30cm. Since the 12 V raise of heat detector does not detect smoke (as opposed to optical smoke detectors), it is used mainly in places with high dust and smoke pollution (kitchens, smoke rooms, garages). The detector triggers an alarm when the maximum temperature of 57 degrees is exceeded or when the temperature rises more than 5 degrees with 3 minutes. By changing a jumper, you can configure it as NO or as NC detector. It is therefore suitable for every wired alarm system. The 12 V raise of heat detector is supplied externally with 10-15V operating voltage and is EN54 certified.
- Detects temperature changes: 3°C within one minute
- Detects maximum temperature: 60°C
- Can be used in humid spaces
The 12 V raise of heat detector detects incipient fires. It reacts to an excessive maximum temperature and a sudden temperature rise. These indicators are reliably detected and reported to the alarm centre.
The 12 V raise of heat detector is mounted on the ceiling in the centre of the room. The minimum distance to the side wall should be 30cm. Since the 12 V raise of heat detector does not detect smoke (as opposed to optical smoke detectors), it is used mainly in places with high dust and smoke pollution (kitchens, smoke rooms, garages). The detector triggers an alarm when the maximum temperature of 57 degrees is exceeded or when the temperature rises more than 5 degrees with 3 minutes. By changing a jumper, you can configure it as NO or as NC detector. It is therefore suitable for every wired alarm system. The 12 V raise of heat detector is supplied externally with 10-15V operating voltage and is EN54 certified.