EUR 0,00
(toimituskulut: 0,00)
Hagor HA DH 900 - 1600 L, 139,7 cm (55"), 190,5 cm (75"), 800 x 600 mm, 0 - 15°, -20 - 20°, Sort
Tuotenumero: [10719795] | Valmistaja: Hagor | Mallinum: 2705 | EAN: 4250058527059
Ikke på lager
Tuotetta ei ole varastossa. Lisätietoja
Loppuunmyyty
Tuotetta ei ole varastossa.
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
Ilmainen toimitus
Bring - Toimitus huoltopisteeseen
Ilmainen toimitus
Bring - Kotiinkuljetus -arkisin.
10,03
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
282,58
ilman ALV 225,16
Kokonaishinta sis. toimitus
282,58
Ilmoita minulle, kun tuotetta on jälleen tarjolla varastossa
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
The HA DH 900-1600 L is a ceiling mount for a single screen with a 55" to 75" (140-191 cm) screen diagonal. It can be mounted in either landscape or portrait orientation.
A VESA mount is already included and can be fitted from min. 100 x 100 mm to max. 800 x 600 mm.
The tilt angle of the TV mount can be adjusted between -5° and +30° without tools using the side turning handles.
Thanks to the lateral slotted hole in the lower tube segment, the mount can be swiveled by ±15° on the installation side to compensate for slight differences, e.g. in the event of incorrect drilling.
The ceiling distance can be varied in 100 mm increments between min. 938 mm and max. 1638 mm. This specification refers to the center of the screen.
Cables are routed internally, concealed from view and unwanted access.
A cover ring for suspended ceilings is included in the scope of delivery and ensures a clean appearance.
The surfaces of the HA DH 900-1600 L are finished with an impact- and scratch-resistant black powder coating.
The maximum load capacity is 50 kg.
A VESA mount is already included and can be fitted from min. 100 x 100 mm to max. 800 x 600 mm.
The tilt angle of the TV mount can be adjusted between -5° and +30° without tools using the side turning handles.
Thanks to the lateral slotted hole in the lower tube segment, the mount can be swiveled by ±15° on the installation side to compensate for slight differences, e.g. in the event of incorrect drilling.
The ceiling distance can be varied in 100 mm increments between min. 938 mm and max. 1638 mm. This specification refers to the center of the screen.
Cables are routed internally, concealed from view and unwanted access.
A cover ring for suspended ceilings is included in the scope of delivery and ensures a clean appearance.
The surfaces of the HA DH 900-1600 L are finished with an impact- and scratch-resistant black powder coating.
The maximum load capacity is 50 kg.