EUR 0,00
(toimituskulut: 0,00)
GELID Silent PWM Y-kaapeli - Jakaja tuulettimelle - 4-pinninen PWM (naaras) 4-pinniseen PWM (uros) - 35 cm
Tuotenumero: [1888616] | Valmistaja: Gelid Solutions | Mallinum: CA-PWM-01 | EAN: 4897025780149
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 7-9 työpäivää. Lisätietoja
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
7,02
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
10,03
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
9,75
ilman ALV 7,77
Kokonaishinta sis. toimitus
16,77
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
Connect 2 GELID fans to your mainboard’s CPU socket.
Use the GELID PWM Y cables to connect a series of up to 5 PWM fans and provide as much extra cooling as desired.
PWM Y Cable (CA-PWM-01)
The PWM signal input from the mainboard is used to control a series of connected PWM fans for optimal performance in noise and cooling.
Features
Connect 2 PWM fans to your mainboard’s CPU socket. Use multiple Y cables to connect a series of up to 5 PWM fans and provide as much extra cooling as desired.
Power drawn into your CPU cooler is adjusted depending on its temperature. An idle CPU does not generate as much heat, requires less active cooling, and hence slower fan speeds will be sufficient. Further this also reduces the overall ambient noise of your PC and it’s handled automatically with little risk to your PC components.
While PWM fan controllers are very common in today’s PC industry and available on most mainboards, there is often only one or two such PWM headers, reserved for the CPU and or the chipset fans. One way this excellent noise reduction idea can be extended to the numerous case fans inside a typical PC is by utilizing a GELID PWM Y Cable.
The long cable provide enough length to reach any location in your case.
Use the GELID PWM Y cables to connect a series of up to 5 PWM fans and provide as much extra cooling as desired.
PWM Y Cable (CA-PWM-01)
The PWM signal input from the mainboard is used to control a series of connected PWM fans for optimal performance in noise and cooling.
Features
Connect 2 PWM fans to your mainboard’s CPU socket. Use multiple Y cables to connect a series of up to 5 PWM fans and provide as much extra cooling as desired.
Power drawn into your CPU cooler is adjusted depending on its temperature. An idle CPU does not generate as much heat, requires less active cooling, and hence slower fan speeds will be sufficient. Further this also reduces the overall ambient noise of your PC and it’s handled automatically with little risk to your PC components.
While PWM fan controllers are very common in today’s PC industry and available on most mainboards, there is often only one or two such PWM headers, reserved for the CPU and or the chipset fans. One way this excellent noise reduction idea can be extended to the numerous case fans inside a typical PC is by utilizing a GELID PWM Y Cable.
The long cable provide enough length to reach any location in your case.