EUR 0,00
(toimituskulut: 0,00)
Goobay 61143, Musta, Ulkona, EV Type 2, 107 mm, 84 mm, 171 mm
Tuotenumero: [20334892] | Valmistaja: Goobay | Mallinum: WEN-61143 | EAN: 4040849611438
Etävarastossa
Tuotetta on etävarastossamme. Toimitusaika noin 4-5 arkipäivää. Lisätietoja
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
7,02
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
10,03
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
49,70
ilman ALV 39,60
Kokonaishinta sis. toimitus
56,72
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
Wall Mount with Cable Rest for EV Type 2 Charging Cable
secures the vehicle-side cable socket in between charging processes
Wall brackets for charging cable sockets (IEC 62196 type 2) prevent the cable from being damaged when stored outside the charging process. Securely fastened to the wall, the holder protects the charging connector from dirt and damage that would occur if it were kept on the floor, e.g. in a garage. This helps to extend the lifetime of the charging cable and keeps the socket and cable clean.
- The charging cable holder securely keeps the plug off the floor between charging cycles to prevent dirt and damage to the connector.
- Mounting the cable socket on the wall prevents damage to the EV charging gun due to mechanical impacts such as driving over it.
- The charging plug can be securely locked in place with just one hand and unlocked again from the dummy socket at the touch of a button.
- Easy to install on the wall of the house or garage, e.g. next to your wall connector, using the dowels and screws supplied (charging cable not included)
secures the vehicle-side cable socket in between charging processes
Wall brackets for charging cable sockets (IEC 62196 type 2) prevent the cable from being damaged when stored outside the charging process. Securely fastened to the wall, the holder protects the charging connector from dirt and damage that would occur if it were kept on the floor, e.g. in a garage. This helps to extend the lifetime of the charging cable and keeps the socket and cable clean.
- The charging cable holder securely keeps the plug off the floor between charging cycles to prevent dirt and damage to the connector.
- Mounting the cable socket on the wall prevents damage to the EV charging gun due to mechanical impacts such as driving over it.
- The charging plug can be securely locked in place with just one hand and unlocked again from the dummy socket at the touch of a button.
- Easy to install on the wall of the house or garage, e.g. next to your wall connector, using the dowels and screws supplied (charging cable not included)