EUR 0,00
(toimituskulut: 0,00)
Barkan Mounting Systems BM466XP, 2,29 m (90"), 75 x 75 mm, 600 x 400 mm, -5 - 15°, 5°, Musta
Tuotenumero: [20714460] | Valmistaja: BARKAN | Mallinum: BM466XP | EAN: 7290016783568
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 7-9 työpäivää. Lisätietoja
Toimitusvaihtoehdot - Valitaan kassalla
Bring - Toimitus huoltopisteeseen
Ilmainen toimitus
Bring - Kotiinkuljetus -arkisin.
15,12
EUR
176,69
ilman ALV 140,79
Kokonaishinta sis. toimitus
176,69
Lisää listaan
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Send på mail
Exceptionally long and stable wall mount with double arm.
Allows 90-degree swivel for TVs up to 77"/ 195.6cm (width up to 68"/ 172 cm) and a 70-degree swivel for TVs up to 90"/ 228.5cm.
Includes a patented mechanism to fit various screen types and screens with special back structure.
Minimum distance from the wall: 4" / 10 cm.
Maximum distance from the wall: 41" / 104 cm.
The mount has 3 pivots which: rotate near the wall 180°, fold 360°, swivel near the screen connection plate 180° in addition to a tool-free tilt from -5° till 15° and a +/-5° leveling after the installation.
Safety tested with 465lbs/ 211kg on wooden-stud and concrete walls. Tested with 331lbs/ 150kg on concrete block walls.
The mount is suitable for wood-stud walls, where the studs are 16" apart.
The rails connecting between the two wall plates can be disassembled, allowing you to set the distance between the wall plates at your discretion. Note, that making this alteration will result in different minimum and maximum distances of the mount from the wall than stated in the specifications.
The mount is suitable to be installed in the corner of a room.
Also compatible for larger screen sizes, where their specifications comply to the mount.
Please check the list of included screen-connection screws in the assembly instructions. If your screen requires different screen-connection screws, please purchase them in your local hardware store.
Product installation - please make sure to follow the assembly instructions precisely. If you have any questions contact our support team.
Allows 90-degree swivel for TVs up to 77"/ 195.6cm (width up to 68"/ 172 cm) and a 70-degree swivel for TVs up to 90"/ 228.5cm.
Includes a patented mechanism to fit various screen types and screens with special back structure.
Minimum distance from the wall: 4" / 10 cm.
Maximum distance from the wall: 41" / 104 cm.
The mount has 3 pivots which: rotate near the wall 180°, fold 360°, swivel near the screen connection plate 180° in addition to a tool-free tilt from -5° till 15° and a +/-5° leveling after the installation.
Safety tested with 465lbs/ 211kg on wooden-stud and concrete walls. Tested with 331lbs/ 150kg on concrete block walls.
The mount is suitable for wood-stud walls, where the studs are 16" apart.
The rails connecting between the two wall plates can be disassembled, allowing you to set the distance between the wall plates at your discretion. Note, that making this alteration will result in different minimum and maximum distances of the mount from the wall than stated in the specifications.
The mount is suitable to be installed in the corner of a room.
Also compatible for larger screen sizes, where their specifications comply to the mount.
Please check the list of included screen-connection screws in the assembly instructions. If your screen requires different screen-connection screws, please purchase them in your local hardware store.
Product installation - please make sure to follow the assembly instructions precisely. If you have any questions contact our support team.