EUR 0,00
(toimituskulut: 0,00)
Brodit Tilt kääntyvä kiinnike - Montering navigaattoriin
Tuotenumero: [20870049] | Valmistaja: Brodit | Mallinum: JAB-981966 | EAN: 7320282155476
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 7-9 työpäivää. Lisätietoja
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
7,02
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
10,03
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
24,32
ilman ALV 19,38
Kokonaishinta sis. toimitus
31,34
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
Mounting Accessories
Tilt swivel mount.
Keep your PNA GPS device in a holder attached to the dashboard, and you will always have it within easy reach! You can easily take the device with you when leaving the vehicle. The holder can be adjusted in order to avoid light reflection on the screen.
With this tilt swivel mount you can have your PNA installed on the dashboard. You use the original mount that comes with the PNA and press it onto the tilt swivel mount, which you can attach onto the ProClip Mounting Platform. This will give you a firm, neat installation.
Please read all of the instructions and look at the pictures before attaching the mount.
- 1. Place the tilt swivel mount in the desired position. Screw the mount into place with the enclosed screws.
- 2. The tilt swivel mount is in place. This mount fits a number a devices, the installation procedure may vary but the principal is similar for all devices.
- 3. Installation of Nüvi etc: For the installation, you will use the original mount that comes with the PNA and press it onto the tilt swivel mount. Place the original mount by the tilt swivel mount so the tilt swivel fits. Press the original mount onto the tilt swivel mount, press until you feel it is properly in place.
- 4. Installation of Street Pilot etc: Place the device by the tilt swivel mount so the tilt swivel fits. Press the device onto the tilt swivel mount, press until you feel it is properly in place.
Tilt swivel mount.
Keep your PNA GPS device in a holder attached to the dashboard, and you will always have it within easy reach! You can easily take the device with you when leaving the vehicle. The holder can be adjusted in order to avoid light reflection on the screen.
With this tilt swivel mount you can have your PNA installed on the dashboard. You use the original mount that comes with the PNA and press it onto the tilt swivel mount, which you can attach onto the ProClip Mounting Platform. This will give you a firm, neat installation.
Please read all of the instructions and look at the pictures before attaching the mount.
- 1. Place the tilt swivel mount in the desired position. Screw the mount into place with the enclosed screws.
- 2. The tilt swivel mount is in place. This mount fits a number a devices, the installation procedure may vary but the principal is similar for all devices.
- 3. Installation of Nüvi etc: For the installation, you will use the original mount that comes with the PNA and press it onto the tilt swivel mount. Place the original mount by the tilt swivel mount so the tilt swivel fits. Press the original mount onto the tilt swivel mount, press until you feel it is properly in place.
- 4. Installation of Street Pilot etc: Place the device by the tilt swivel mount so the tilt swivel fits. Press the device onto the tilt swivel mount, press until you feel it is properly in place.