EUR 0,00
(toimituskulut: 0,00)
LANCOM SFP-XGSPON-1
Tuotenumero: [21725953] | Valmistaja: Lancom Systems | Mallinum: 60207 | EAN: 4044144602078
Etävarastossa
Tuotetta on etävarastossamme. Toimitusaika noin 4-5 arkipäivää. Lisätietoja
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
Ilmainen toimitus
Bring - Toimitus huoltopisteeseen
Ilmainen toimitus
Bring - Kotiinkuljetus -arkisin.
15,12
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
330,73
ilman ALV 263,53
Kokonaishinta sis. toimitus
330,73
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
Direct high-speed connection to passive 10G fiber optic lines (FFTH)
Designed specifically for 10 Gigabit-capable passive optical networks (XGS-PON) directly into the home (fiber to the home / FTTH), the SFP transceiver module LANCOM SFP-XGSPON-1 offers up to 10 Gbps both downstream and upstream. By simply plugging it into your LANCOM gateway, you can establish a direct fiber-optic connection to an XGS-PON network. This eliminates the time-consuming installation of a separate provider modem.
Advantages
Future-proof use of XGS-PON technology
For data transmission via fiber to the home (FTTH), XGS-PON technology represents the further development of the GPON standard. XGS-PON offers symmetrical speeds of up to 10 Gbps both downstream and upstream, which far exceeds the capacity of conventional GPON networks.
The XGS-PON module LANCOM SFP-XGSPON-1 is backward compatible with LANCOM gateways with 1G SFP interfaces and still offers up to 1 Gbps. This allows network operators to gradually modernize their infrastructure without interrupting existing services. A seamless upgrade with existing LANCOM devices to XGS-PON technology is therefore possible with the LANCOM SFP-XGSPON-1.*
Direct connection to XGS-PON FTTH networks without separate provider modem
The SFP transceiver module LANCOM SFP-XGSPON-1 handles the necessary conversion of the incoming data signals. This eliminates the need for an additional fiber-optic modem between the fiber-optic connection in the building and the gateway. This eliminates the need for cabling and installation of the modem as well as the installation of an additional power supply.
* The compatibility of the LANCOM SFP-XGSPON-1 has been tested with the support of Deutsche Telekom for operation on corresponding FTTH connections with 2 Gbps.
Easy integration of the LANCOM SFP-XGSPON-1
The LANCOM SFP-XGSPON-1 module is easily connected via the 1G SFP or 10G SFP+ ports of the LANCOM 1800, 1900, and ISG series as well as the LANCOM 2100EF and LANCOM WLC-2000.
Note: To use the LANCOM SFP-XGSPON-1, at least LCOS version LCOS 10.80 RU9 is required on the device side. Connecting the module to 1G SFP ports limits the maximum data transmission to 1 Gbps accordingly.
Designed specifically for 10 Gigabit-capable passive optical networks (XGS-PON) directly into the home (fiber to the home / FTTH), the SFP transceiver module LANCOM SFP-XGSPON-1 offers up to 10 Gbps both downstream and upstream. By simply plugging it into your LANCOM gateway, you can establish a direct fiber-optic connection to an XGS-PON network. This eliminates the time-consuming installation of a separate provider modem.
Advantages
Future-proof use of XGS-PON technology
For data transmission via fiber to the home (FTTH), XGS-PON technology represents the further development of the GPON standard. XGS-PON offers symmetrical speeds of up to 10 Gbps both downstream and upstream, which far exceeds the capacity of conventional GPON networks.
The XGS-PON module LANCOM SFP-XGSPON-1 is backward compatible with LANCOM gateways with 1G SFP interfaces and still offers up to 1 Gbps. This allows network operators to gradually modernize their infrastructure without interrupting existing services. A seamless upgrade with existing LANCOM devices to XGS-PON technology is therefore possible with the LANCOM SFP-XGSPON-1.*
Direct connection to XGS-PON FTTH networks without separate provider modem
The SFP transceiver module LANCOM SFP-XGSPON-1 handles the necessary conversion of the incoming data signals. This eliminates the need for an additional fiber-optic modem between the fiber-optic connection in the building and the gateway. This eliminates the need for cabling and installation of the modem as well as the installation of an additional power supply.
* The compatibility of the LANCOM SFP-XGSPON-1 has been tested with the support of Deutsche Telekom for operation on corresponding FTTH connections with 2 Gbps.
Easy integration of the LANCOM SFP-XGSPON-1
The LANCOM SFP-XGSPON-1 module is easily connected via the 1G SFP or 10G SFP+ ports of the LANCOM 1800, 1900, and ISG series as well as the LANCOM 2100EF and LANCOM WLC-2000.
Note: To use the LANCOM SFP-XGSPON-1, at least LCOS version LCOS 10.80 RU9 is required on the device side. Connecting the module to 1G SFP ports limits the maximum data transmission to 1 Gbps accordingly.