Hoffman MAS0302515R5, 250 mm, 155 mm, 300 mm, 4,54 kg, 1 kpl

For outdoor installation, the use of a rain hood ARF and 100% polyester paint coating is recommended
Body: Folded and seam welded. Four 8.5 mm diameter holes for wall fixing, pressed out in 20.4 mm diameter × 2 mm depressions, to allow air circulation around the rear part of the enclosure
Door: Surface mounted with 130-degree opening; concealed removable hinges with captive pin
Door: Hinges can be mounted to allow left or right hand opening
Door: inner M6 welded studs to mount door profiles MMDP
Door: Sealing is ensured by an injected one piece polyurethane gasket
Lock: Customized lock with double-bit for easy opening of the door
Gland plate: Situated at the far rear of the enclosure, to make cabling onto the mounting plate easier
Mounting plate: The mounting plate is marked vertically at 10 mm intervals, for easy horizontal positioning of equipment
Mounting plate: On the top and bottom there are holes to facilitate cable fixing
Mounting plate: All sides, from 800 mm and above, are strengthened by folded edges
Delivery: Enclosure with door and mounting plate; for height 600 mm and above, two door mounting profiles; gland plate(s) with gasket(s), plastic double-bit 3 mm key, mounting accessories, metallic key, for height 1000 mm and above