Thermal Grizzly TG-DDMH-I1851-V1, Kannen avaaja, Musta, Valkoinen, Punainen, Intel 1851
FBAC4895-B52C-4E03-B099-A6A8F8B8017B Created with sketchtool. 706D6907-81E1-46A2-B8F9-7B702A1EF2C7 Created with sketchtool. 6A870209-E7F5-44F5-A66F-09E20C85A0DC Created with sketchtool. 0BB04D6C-A9AB-4913-BF4F-5A23954E68E1 Created with sketchtool. 501E26C7-66C1-4DAA-B740-6CFAF55A1B39 Created with sketchtool. C105F7D3-D5EE-43C9-9EE8-05CC42B296D4 Created with sketchtool. D94689D8-7CBB-41C8-AC06-F79D81FF82D5 Created with sketchtool. DA4C7ED9-2512-4D52-94F0-92800F2A6E04 Created with sketchtool. 42E133FD-828F-4CF4-A0BF-560014487A57 Created with sketchtool. F52D9745-4BFD-4506-BEEF-630FD09EF2D9 Created with sketchtool.
24/7 Asiakaspalvelu | Saa vastaus saman tien!
0
0
Image Search

EUR 0,00

(toimituskulut: 0,00)

0
  1. PC-komponentit
  2. Jäähdytys ja modaus
  3. Muu jäähdytys

Thermal Grizzly TG-DDMH-I1851-V1, Kannen avaaja, Musta, Valkoinen, Punainen, Intel 1851

Tuotenumero: [21898664] | Valmistaja: Thermal Grizzly | Mallinum: TG-DDMH-i1851-V1 | EAN: 4260711991172
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 7-9 työpäivää. Lisätietoja
Toimitusvaihtoehdot  - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
Ilmainen toimitus
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
10,03
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten: Tallenna
EUR 74,53
ilman ALV 59,39
Kokonaishinta sis. toimitus 74,53
Lue lisää teknisistä tiedoista
The Intel 1851 Delid-Die-Mate Heater V1 is a tool designed to assist in removing the heat spreader from Intel Core Ultra 200 CPUs using the Intel 1851 Delid-Die-Mate V1. The heater raises the temperature of the CPU and the delidder to the required 165°C for delidding. Note: A laptop/smartphone charger with at least 65 watts of power and a USB Type-C connector is required!

The Intel 1851 Delid-Die-Mate Heater V1 is a specially designed heating element for the Intel 1851 Delid-Die-Mate V1. The heater raises the temperature of both the CPU and the delidder to 165°C, the necessary temperature for delidding. The operation is controlled via a control unit with an OLED display, which is connected to the heater with two cables. A laptop/smartphone charger with at least 65 watts of power and a USB Type-C connector, which is not included, is required for the heater to operate. A small amount of thermal paste is also needed.