EUR 0,00
(toimituskulut: 0,00)
Gelid Solutions FN-ZODIAC-01, Tuuletin, 12 cm, 700 RPM, 1600 RPM, 35 dB, 65,5 cfm
Tuotenumero: [24899911] | Valmistaja: Gelid Solutions | Mallinum: FN-ZODIAC-01 | EAN: 4897025783508
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 7-9 työpäivää. Lisätietoja
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
7,02
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
10,03
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
17,12
ilman ALV 13,64
Kokonaishinta sis. toimitus
24,14
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
ZODIAC introduces a harmonious combination of top-notch technologies and vivid design. It boasts 12 ARGB LEDs illuminating stylish lighting. It features a Hydro Dynamic Bearing for increased reliability and an optimized impeller for enhanced airflow.
12 Full Color RGB LEDs: circularly mounted high-bright LEDs for a stunningly vivid RGB Lighting experience.
Programmable Digital-RGB Control: limitless color modes and lighting effects via individually addressable RGB LEDs.
Extreme Static Pressure: powerful impeller with the unprecedented static pressure and performance profile.
Noiseless Motor Drive IC: newly designed and enhanced motor driver to eliminate clicking noise.
Hydro Dynamic Bearing: long life Hydro Dynamic bearing guarantee ultra low noise.
Wide Range RPM: extended fan speed in the range 700 – 1600 RPM.
Broad Compatibility: All modern motherboards with RGB Sync controls and 5V Addressable RGB (ARGB) headers are supported.
STANDARD RGB AND INDIVIDUALLY ADDRESSABLE RGB EXPLAINED
In standard RGB applications, this type of fans uses the standard RGB LED header with 4-wiring: 12V, R, G, B. All the LEDs integrated with the fan are then connected onto the same 4 busses, they are all controlled as a whole, so they each will output exactly the same color.
It’s like you set a color for an object in your graphics editor, for example, Red: 25, Green: 50 and Blue: 125, an external RGB controller or motherboard drives the standard RGB LED fan in the same way by altering power on the color busses at a proper duty cycle – the Red, Green and Blue bus, respectively – to output the desired RGB color.
Of course, colors can be managed dynamically, with numerous lighting effects in series. But uniformity of the LEDs – one color for all the LEDs at a time – limits RGB lighting effects to some degree.
12 Full Color RGB LEDs: circularly mounted high-bright LEDs for a stunningly vivid RGB Lighting experience.
Programmable Digital-RGB Control: limitless color modes and lighting effects via individually addressable RGB LEDs.
Extreme Static Pressure: powerful impeller with the unprecedented static pressure and performance profile.
Noiseless Motor Drive IC: newly designed and enhanced motor driver to eliminate clicking noise.
Hydro Dynamic Bearing: long life Hydro Dynamic bearing guarantee ultra low noise.
Wide Range RPM: extended fan speed in the range 700 – 1600 RPM.
Broad Compatibility: All modern motherboards with RGB Sync controls and 5V Addressable RGB (ARGB) headers are supported.
STANDARD RGB AND INDIVIDUALLY ADDRESSABLE RGB EXPLAINED
In standard RGB applications, this type of fans uses the standard RGB LED header with 4-wiring: 12V, R, G, B. All the LEDs integrated with the fan are then connected onto the same 4 busses, they are all controlled as a whole, so they each will output exactly the same color.
It’s like you set a color for an object in your graphics editor, for example, Red: 25, Green: 50 and Blue: 125, an external RGB controller or motherboard drives the standard RGB LED fan in the same way by altering power on the color busses at a proper duty cycle – the Red, Green and Blue bus, respectively – to output the desired RGB color.
Of course, colors can be managed dynamically, with numerous lighting effects in series. But uniformity of the LEDs – one color for all the LEDs at a time – limits RGB lighting effects to some degree.