Time savings during installation:Quick wiring via screw terminals for 18–26 AWG – tool-assisted with flat-head screwdriver ≤ 2.5 mm. Dual interface for flexible connection: Equipped with a D-Sub-25 plug and a D-Sub-25 socket – ideal as a compact feed-through or branch point for serial signals. Versatile industrial use: Suitable for structured wiring in control cabinets, machine control, signal distribution, or test setups. DIN rail mounting for standard-compliant installation: The integrated DIN rail clip enables direct mounting on mounting rails – quick, workshop-ready, and space-saving. High signal quality:An insulation resistance of ≥ 10 MΩ at 300 V DC and a rated current of 0.7 A per pin ensure reliable signal transmission – even under continuous load.
The InLine® D-Sub 25 terminal block with combined socket and plug design is designed for structured signal wiring in industrial applications. It combines two serial D-Sub interfaces (male & female) in a compact module. The side-accessible screw terminals with pressure plate allow the connection of wires in the range of 18–26 AWG – tool-assisted with a flat-head screwdriver ≤ 2.5 mm. The robust plastic housing with pre-mounted DIN rail clip is suitable for quick mounting on top-hat rails. An EVA insulating layer provides protection when mounting on conductive surfaces. Ideal for control technology, prototyping, test stations, or handover solutions.
D-Sub 25 interfaces:1× female connector, 1× male connector, with mounting threads (UNC #4-40) Connection technology:Screw terminal with pressure plate Connection range:18–26 AWG Actuation:With flat-blade screwdriver ≤ 2.5 mm Rated current: 0.7 A per pin Max. operating voltage: 100 V between two signals Insulation resistance:≥ 10 MΩ @ 300 V DC Operating temperature:–20 °C to +105 °C Insulation layer:EVA insulation on underside Mounting:Housing for direct mounting on DIN rail Dimensions:approx. 88 × 87 × 51 mm (W × H × D)
Liitäntä
Terminal block / D-Sub 25
Tuotteen väri
Vihreä
Liittimen sukupuoli
Naaras/naaras
AWG-koko
26/18
Dielektrinen lujuus
300 V
Kosketinresistanssi
10 mΩ
Jännite
100 V
Virta
0,7 A
Käyttölämpötila (T-T)
20 - 105 °C
Vaatimustenmukaisuustodistukset
RoHS, TÜV mark
Mitat (LxSxK)
88 x 87 x 51 mm
Paino
155 g
Tuotteen leveys
88 mm
Tuotteen syvyys
87 mm
Tuotteen korkeus
51 mm
Lukumäärä per pakkaus
1 kpl
Pakkauksen leveys
95 mm
Pakkauksen syvyys
125 mm
Pakkauksen korkeus
55 mm
Pakkauksen paino
203 g
Pakkauksen tilavuus
100 cm ³
Pakkaustyyppi
Muovipussi
Alkuperämaa
Taiwan
Löydämme tuotteen järjestelmästämme helposti seuraavalla tuotenumerolla
EAN:
4043718346066
Miksi samalla tuotteella on monta eri tuotesivua tai tuotenumeroa?
Valmistajat usein julkaisevat saman tuotteen monella eri tuotenumerolla. Usein eroa on vain pakkauksessa. Eri tuotepakkaus saattaa olla suunniteltu eri valtioille.
Yritämme parhaamme mukaan laittaa samat tuotteet saman tuotenumeron alle, mutta joskus sama tuote on eri tuotenumeroilla sivullamme.