EUR 0,00
(toimituskulut: 0,00)
InLine 33054E, USB Type-C, 11 mm, 135 mm, 9 mm, 6 g, 11 x 135 x 9 mm
Tuotenumero: [25731476] | Valmistaja: Inline | EAN: 4043718350131
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 7-9 työpäivää. Lisätietoja
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
7,02
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
10,03
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
25,08
ilman ALV 19,98
Kokonaishinta sis. toimitus
32,10
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
Active DAC adapter for high-quality signal conversion:The integrated Conexant CX21988 digital-to-analogue converter supports up to 96kHz/24-bit. It reduces distortion and signal loss and ensures clear audio output.
Supports headset function including microphone:The integrated ADC with 48kHz/16-bit allows the use of stereo headsets including microphone. It ensures stable voice transmission.
High sound purity thanks to optimised audio values:With a signal-to-noise ratio of 100dB and a THD+N value of -85dB, clean and detailed audio reproduction is achieved.
Compatible with CTIA and OMTP standards:Supports common 3.5 mm stereo headsets. This facilitates integration into existing audio setups.
Robust construction for continuous use:Aluminium housing and shielded, flexible 15 cm cable support long-lasting use and stable signal transmission.
This USB-C to 3.5 mm audio adapter is an active solution for digital audio processing. The integrated Conexant CX21988 codec chiphandles both digital-to-analogue conversion for audio output and analogue-to-digital conversion for microphone applications. This makes the adapter suitable for applications that require stable, high-quality signal processing.
With a DAC resolution of up to 96kHz/24-bit, the adapter supports high-resolution audio signals. The ADC operates at 48kHz/16-bit and enables reliable voice transmission. A signal-to-noise ratio of 100dB and crosstalk suppression of -50dB contribute to clear audio reproduction.
The 3.5 mm jack supports both CTIA and OMTP standard assignments. The adapter automatically detects when headphones are plugged in or unplugged. Plug & Play allows direct operation without additional driver installation.
Universal compatibility – Works with most USB-C devices, including smartphones and tablets.
Plug & play, no additional drivers required
Interface pin definition: 3.5 mm jack (female)
Matching/simulated headphone impedance: typically 32 ohms
Supported headphone types: CTIA and OMTP standard headphones
Detection of headphones being plugged in/out
Digital audio codec chip: Conexant CX21988
Audio codec resolution:
DAC: 96 kHz / 24 bit
ADC: 48 kHz / 16 bit
Signal-to-noise ratio (SNR): 100 dB
Total harmonic distortion including noise (THD+N): -85 dB
Crosstalk suppression: -50 dB
Supports headset function including microphone:The integrated ADC with 48kHz/16-bit allows the use of stereo headsets including microphone. It ensures stable voice transmission.
High sound purity thanks to optimised audio values:With a signal-to-noise ratio of 100dB and a THD+N value of -85dB, clean and detailed audio reproduction is achieved.
Compatible with CTIA and OMTP standards:Supports common 3.5 mm stereo headsets. This facilitates integration into existing audio setups.
Robust construction for continuous use:Aluminium housing and shielded, flexible 15 cm cable support long-lasting use and stable signal transmission.
This USB-C to 3.5 mm audio adapter is an active solution for digital audio processing. The integrated Conexant CX21988 codec chiphandles both digital-to-analogue conversion for audio output and analogue-to-digital conversion for microphone applications. This makes the adapter suitable for applications that require stable, high-quality signal processing.
With a DAC resolution of up to 96kHz/24-bit, the adapter supports high-resolution audio signals. The ADC operates at 48kHz/16-bit and enables reliable voice transmission. A signal-to-noise ratio of 100dB and crosstalk suppression of -50dB contribute to clear audio reproduction.
The 3.5 mm jack supports both CTIA and OMTP standard assignments. The adapter automatically detects when headphones are plugged in or unplugged. Plug & Play allows direct operation without additional driver installation.
Universal compatibility – Works with most USB-C devices, including smartphones and tablets.
Plug & play, no additional drivers required
Interface pin definition: 3.5 mm jack (female)
Matching/simulated headphone impedance: typically 32 ohms
Supported headphone types: CTIA and OMTP standard headphones
Detection of headphones being plugged in/out
Digital audio codec chip: Conexant CX21988
Audio codec resolution:
DAC: 96 kHz / 24 bit
ADC: 48 kHz / 16 bit
Signal-to-noise ratio (SNR): 100 dB
Total harmonic distortion including noise (THD+N): -85 dB
Crosstalk suppression: -50 dB