EUR 0,00
(toimituskulut: 0,00)
PolarPro P4-GMBL-GRD, Kardaanirenkaan suoja, DJI
Tuotenumero: [25963277] | Valmistaja: POLARPRO | Mallinum: P4-GMBL-GRD-EA-AST | EAN: 0850454006864
Ikke på lager
Tuotetta ei ole varastossa. Lisätietoja
Loppuunmyyty
Tuotetta ei ole varastossa.
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
7,02
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
10,03
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
21,31
ilman ALV 16,98
Kokonaishinta sis. toimitus
28,33
Ilmoita minulle, kun tuotetta on jälleen tarjolla varastossa
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
- Engineered to work with the DJI Phantom 4 VPS sensors;
- Secure snap-on installation and removal;
- Increases protection during unexpected rough landings and takeoffs;
- Glass filled nylon is extremely durable and lightweight.
Installation Note: Before each flight, check the accuracy of the Phantom 4 VPS. Hold the drone at 3 feet above level ground with the Gimbal Guard installed. Your flight app should show an altitude of 3 feet. If it shows 0 feet, move the Gimbal Guard forward until the app corrects the Phantom 4 VPS to an altitude of 3 feet. With correct installation of the Gimbal Guard, the VPS will not be affected.
The PolarPro Phantom 4 Gimbal Guard provides an additional layer of protection while flying or landing your drone. The Gimbal Guard quickly and securely snaps into place, adding protection to your camera/gimbal during rough takeoffs and landings, and is compatible with all PolarPro Phantom 4 accessories. The jet black color scheme of the Gimbal Guard increases visibility when the Phantom 4 is flying in the air. Covered by PolarPro's Lifetime Warranty, the Phantom 4 Gimbal Guard is built to last.
- Secure snap-on installation and removal;
- Increases protection during unexpected rough landings and takeoffs;
- Glass filled nylon is extremely durable and lightweight.
Installation Note: Before each flight, check the accuracy of the Phantom 4 VPS. Hold the drone at 3 feet above level ground with the Gimbal Guard installed. Your flight app should show an altitude of 3 feet. If it shows 0 feet, move the Gimbal Guard forward until the app corrects the Phantom 4 VPS to an altitude of 3 feet. With correct installation of the Gimbal Guard, the VPS will not be affected.
The PolarPro Phantom 4 Gimbal Guard provides an additional layer of protection while flying or landing your drone. The Gimbal Guard quickly and securely snaps into place, adding protection to your camera/gimbal during rough takeoffs and landings, and is compatible with all PolarPro Phantom 4 accessories. The jet black color scheme of the Gimbal Guard increases visibility when the Phantom 4 is flying in the air. Covered by PolarPro's Lifetime Warranty, the Phantom 4 Gimbal Guard is built to last.