EUR 0,00
(toimituskulut: 0,00)
XtendLAN PETG filament 1,75mm copper colour 1kg
Tuotenumero: [25972037] | Valmistaja: XtendLan | Mallinum: 3DF-PETG1.75-CR 1kg | EAN: 8592457201441
Tuotteella ei ole kuvaa - kuvitus näyttää tuotteen kategorian
Ikke på lager
Tuotetta ei ole varastossa. Lisätietoja
Loppuunmyyty
Tuotetta ei ole varastossa.
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
7,02
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
15,12
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
24,86
ilman ALV 19,81
Kokonaishinta sis. toimitus
31,88
Ilmoita minulle, kun tuotetta on jälleen tarjolla varastossa
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
XtendLAN PETG filament 1,75 mm copper colour 1 kg
Plastic filament for 3D printing, on a spool. PET-G (Polyethylene Terephthalate Glycol Modified) is a material well known for its plastic bottles. PETG combines the best of ABS and PLA properties for 3D printing. It is a strong and tough material. In terms of durability, the material is close to polycarbonates. It has very little heat shrinkage and is suitable for printing even large objects. It has a high resistance to solvents and acids. It can withstand high and low temperatures. It has very good adhesion to the substrate when 3D printing. The printed object can be heat polished. The filament is vacuum protected and a desiccant bag is present in each package to prevent any moisture from affecting the material. Supplied in cardboard packaging with a window for colour checking.
BASIC SPECIFICATIONS
Fibre material: PET-G
Fibre diameter: 1,75 mm
Recommended extruder temperature: 230 - 250 °C
Recommended pad temperature: 70 - 90 °C
Coil dimensions: 200 mm diameter x 66 mm height (57 mm centre hole diameter)
Weight: 1 kg
Colour: copper
Plastic filament for 3D printing, on a spool. PET-G (Polyethylene Terephthalate Glycol Modified) is a material well known for its plastic bottles. PETG combines the best of ABS and PLA properties for 3D printing. It is a strong and tough material. In terms of durability, the material is close to polycarbonates. It has very little heat shrinkage and is suitable for printing even large objects. It has a high resistance to solvents and acids. It can withstand high and low temperatures. It has very good adhesion to the substrate when 3D printing. The printed object can be heat polished. The filament is vacuum protected and a desiccant bag is present in each package to prevent any moisture from affecting the material. Supplied in cardboard packaging with a window for colour checking.
BASIC SPECIFICATIONS
Fibre material: PET-G
Fibre diameter: 1,75 mm
Recommended extruder temperature: 230 - 250 °C
Recommended pad temperature: 70 - 90 °C
Coil dimensions: 200 mm diameter x 66 mm height (57 mm centre hole diameter)
Weight: 1 kg
Colour: copper