EUR 0,00
(toimituskulut: 0,00)
wolfcraft GmbH 8394000, kivi, laatta, tiili, 11,5 cm, 2,22 cm, 13 300 rpm, 3 kpl
Tuotenumero: [26166915] | Valmistaja: Wolfcraft | Mallinum: 8394000 | EAN: 4006885839403
Etävarasto (16-23 päivää)
Tuotetta on etävarastossa. Toimitusaika 16-23 arkipäivää. Lisätietoja
Toimitusvaihtoehdot - Valitse vaihtoehto napsauttamalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
7,02
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
15,12
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
21,88
ilman ALV 17,43
Kokonaishinta sis. toimitus
28,90
Lisää listaan
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Send på mail
3-piece diamond cutting disc set, Ø 115 mm, suitable for universal use - ideal for cutting stone, tiles, brick and ceramics
- holder with Ø 22.23 mm for use with all commonly available angle grinders
- certified in accordance with DIN EN 13236 for tested safety
- Observe safety and operating instructions.
The 3-piece diamond cutting disc set, Ø 115 mm, is suitable for universal use and forms the ideal basic kit for cutting stone, tiles, brick and ceramics. It includes a ceramic cutting disc for cutting marble, tiles and ceramic tiles, a turbo cutting disc for bricks, clay bricks and granite, and a segmented diamond disc for natural stone, unreinforced concrete and paving slabs. The segments were sintered using a hot press procedure for maximum safety. All discs come with a holder with Ø 22.23 mm and are suitable for use with all commonly available angle grinders. The products are certified in accordance with DIN EN 13236; you are thus putting your trust in tested safety.
Observe the safety and operating instructions.
- holder with Ø 22.23 mm for use with all commonly available angle grinders
- certified in accordance with DIN EN 13236 for tested safety
- Observe safety and operating instructions.
The 3-piece diamond cutting disc set, Ø 115 mm, is suitable for universal use and forms the ideal basic kit for cutting stone, tiles, brick and ceramics. It includes a ceramic cutting disc for cutting marble, tiles and ceramic tiles, a turbo cutting disc for bricks, clay bricks and granite, and a segmented diamond disc for natural stone, unreinforced concrete and paving slabs. The segments were sintered using a hot press procedure for maximum safety. All discs come with a holder with Ø 22.23 mm and are suitable for use with all commonly available angle grinders. The products are certified in accordance with DIN EN 13236; you are thus putting your trust in tested safety.
Observe the safety and operating instructions.