EUR 0,00
(toimituskulut: 0,00)
Telegärtner J00020A0388, Hopea, Metalli, IEC 60603-7-5 / -7-3
Tuotenumero: [3431127] | Valmistaja: Telegärtner | Mallinum: J00020A0388 | EAN: 4018359262211
Etävarasto (16-23 päivää)
Tuotetta on etävarastossa. Toimitusaika 16-23 arkipäivää. Lisätietoja
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
7,02
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
15,12
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
22,44
ilman ALV 17,88
Kokonaishinta sis. toimitus
29,46
Lisää listaan
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Send på mail
-Full shielded.
-360° shielding contact and strain relief by means of two (one, in the case of Cat.5e) separate, captive screw clamps for the exterior cable jacket and shielding.
-can be wired up from all directions, in 8x45° steps; enables reduction in stock diversity .
-either horizontal or vertical installation in the cable duct as a result of variable cable inlet.
-Type offers low installtion depth; problem-free installation in floor tanks as a result of cable inlet form the side within the subfloor mounting box.
-option of plug-in ground connection at all four corners; according to DIN 46342-1; 6,3 mm
can be combined with covers for a wide variety of switching programs.
-simple lead presorting guarantees leads will be laid without damage and good transmission performance.
-cover plate can be retrofitted with a flip-up loss-proof, transparent label field.
-dust cover flaps.
-detachable vertical fixing rail of the four-hole bearer ring (e. g. for subfloor installation).
-Overbend protection: 6- (RJ11/12) and 8-pin connectors (RJ45) can be used interchangeably in the MJ outlets without additional installation kits.
-360° shielding contact and strain relief by means of two (one, in the case of Cat.5e) separate, captive screw clamps for the exterior cable jacket and shielding.
-can be wired up from all directions, in 8x45° steps; enables reduction in stock diversity .
-either horizontal or vertical installation in the cable duct as a result of variable cable inlet.
-Type offers low installtion depth; problem-free installation in floor tanks as a result of cable inlet form the side within the subfloor mounting box.
-option of plug-in ground connection at all four corners; according to DIN 46342-1; 6,3 mm
can be combined with covers for a wide variety of switching programs.
-simple lead presorting guarantees leads will be laid without damage and good transmission performance.
-cover plate can be retrofitted with a flip-up loss-proof, transparent label field.
-dust cover flaps.
-detachable vertical fixing rail of the four-hole bearer ring (e. g. for subfloor installation).
-Overbend protection: 6- (RJ11/12) and 8-pin connectors (RJ45) can be used interchangeably in the MJ outlets without additional installation kits.