EUR 0,00
(toimituskulut: 0,00)
Black Box TS200A
Tuotenumero: [4747065] | Valmistaja: Black box | Mallinum: TS200A
Ikke på lager
Tuotetta ei ole varastossa. Lisätietoja
Loppuunmyyty
Tuotetta ei ole varastossa.
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
Ilmainen toimitus
Bring - Toimitus huoltopisteeseen
Ilmainen toimitus
Bring - Kotiinkuljetus -arkisin.
10,03
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
385,64
ilman ALV 307,28
Kokonaishinta sis. toimitus
385,64
Ilmoita minulle, kun tuotetta on jälleen tarjolla varastossa
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
Quick Facts
- Identifies and verifies Voice over IP (VoIP) and Power over Ethernet (PoE) ports.
- Measures port voltage to ensure that ports supply the proper voltage level to devices.
- Verifies connectivity for 10BASE-T, 100BASE-TX, or 1000BASE-T links for 802.3 equipment.
Further Details
- Auto powerdown preserves battery life.
- Detects and decodes link signals on Ethernet networks and identifies signaling type.
- Identifies port speed, duplex mode, and autonegotiation capabilities for ports tested.
If your job includes frequent testing of Gigabit Ethernet links and Power over Ethernet (PoE) ports that supply power to Voice over IP (VoIP) phone systems, then you need the BLACK BOX® Veri-Net VoIP.
This advanced tester offers Gigabit-over-copper-link testing as well as VoIP/PoE detection. It even measures the voltage supplied by the VoIP or PoE port to ensure that it’s adequate.
In addition to verifying whether there’s correct power, the Veri-Net VoIP also detects and transmits Link signals, testing the VoIP or PoE port to determine the speed and duplex mode. If there’s a duplex mismatch between equipment ports, you’ll know it.
And, so you can accurately map your network, the tester enables you to identify which port on a connected hub or switch corresponds to a particular wall outlet.
Just insert the Veri-Net VoIP’s plug end into the RJ-45 port of a hub, switch, network interface card (NIC), or wall outlet and press its TEST button. The tester then begins scanning the wire pairs for voltage. An included RJ-45 coupler enables you to attach the tester to a UTP or an STP cable.
- Identifies and verifies Voice over IP (VoIP) and Power over Ethernet (PoE) ports.
- Measures port voltage to ensure that ports supply the proper voltage level to devices.
- Verifies connectivity for 10BASE-T, 100BASE-TX, or 1000BASE-T links for 802.3 equipment.
Further Details
- Auto powerdown preserves battery life.
- Detects and decodes link signals on Ethernet networks and identifies signaling type.
- Identifies port speed, duplex mode, and autonegotiation capabilities for ports tested.
If your job includes frequent testing of Gigabit Ethernet links and Power over Ethernet (PoE) ports that supply power to Voice over IP (VoIP) phone systems, then you need the BLACK BOX® Veri-Net VoIP.
This advanced tester offers Gigabit-over-copper-link testing as well as VoIP/PoE detection. It even measures the voltage supplied by the VoIP or PoE port to ensure that it’s adequate.
In addition to verifying whether there’s correct power, the Veri-Net VoIP also detects and transmits Link signals, testing the VoIP or PoE port to determine the speed and duplex mode. If there’s a duplex mismatch between equipment ports, you’ll know it.
And, so you can accurately map your network, the tester enables you to identify which port on a connected hub or switch corresponds to a particular wall outlet.
Just insert the Veri-Net VoIP’s plug end into the RJ-45 port of a hub, switch, network interface card (NIC), or wall outlet and press its TEST button. The tester then begins scanning the wire pairs for voltage. An included RJ-45 coupler enables you to attach the tester to a UTP or an STP cable.