IDEAL NaviTEK NT - Verkkotestauslaite

Copper and Fiber Network Troubleshooter. The NaviTEK NT is a network tester for troubleshooting and maintenance of active and passive copper and fiber networks. Incorporating an improved graphical interface NaviTEK NT allows network technicians to pinpoint and solve network connectivity issues faster than ever before. Subsequently tests can be saved as pdf reports and shared with colleagues and clients using the free AnyWare(tm) app. Addressing the needs of today's network technicians Today network technicians have a broad selection of software troubleshooting tools at their disposal and whilst useful in certain situations and environments they do have limitations. NaviTEK NT on the other hand offers a comprehensive suite of tests and troubleshooting functionality only found on dedicated hand-held testers. Copper and fiber test interfaces Fast detection of link and IP information including duplex speed port ID VLAN DNS DHCP Gateway status and IP address Detects services such as ISDN POTS and PoE Accurate wire mapping including length measurement and distance to fault Rugged compact design permits use in confined spaces Not susceptible to virus and malware attack Port and Network Summary Info- The Autotest button displays summary information and allows for a detailed inspection of network parameters. VLAN detection and operation- Automatic detection of VLAN ID's allows the user to configure NaviTEK NT for operation on a VLAN. Custom Wiremap- Use a list of wire-map templates for common Ethernet cable types as well as non-Ethernet cables such as Profinet and ISDN. EDP/LLDP/CDP port information- Show port information using Extreme Discovery Protocol (EDP) Link Layer Discovery Protocol (LLDP) and Cisco Discovery Protocol (CDP). Netscan- Display a list of IP and MAC addresses of every device connected to the network. Network Probe- View network illustration to verify the test results of each network component. NaviTEK NT performs tests for copper cabling and networks including Display network configuration- IPv4/IPv6 compatible Advanced wire-map for miswires split pairs opens and shorts Distance to opens and shorts (TDR) PoE/PoE+ detection Tone generator for cable tracing Autotest button performs Ping and Traceroute test (network mode) Hub blink for port identification DHCP client Switch detection- 10/100/1000 Mb/s User-exchangeable RJ45 inserts Support for up to 12 wire-map remotes Backlit color screen NaviTEK NT Plus includes all the features of NaviTEK NT as well as Touch screen Custom wire-map Autotest button performs a suite of network tests Internet connectivity (Ping DNS Gateway Traceroute) and NetScan Network Probe (NET TEST) provides detailed port and network information of each device Port identification using EDP/CDP/LLDP protocols VLAN detection and support Network scan (IP and MAC addresses of devices) PoE/PoE+ load test Traffic utilization bar graph Internal memory for 5000 test reports Generate test reports (PDF or CSV) I IDEALAnyWARE mobile app NaviTEK NT Pro has all of the features of NaviTEK NT Plus as well as Fiber optic cable interface Logon using the 802.1x protocol The optical power level and pass/fail indication with supported SFP Loopback mode for transmission testing on both copper and fiber interfaces Test Reporting NaviTEK NT automatically generates test reports in PDF or CSV format. The summary page of each report can be customized to include logo company and operator details. Choose between 3 different reports that can show either passed failed or all test reports in each report Summary Brief Full.