EUR 0,00
(toimituskulut: 0,00)
Vision VFM-DA/4, Läpipultattu, 7 kg, 68,6 cm (27"), 75 x 75 mm, 100 x 100 mm, Musta
Tuotenumero: [6480896] | Valmistaja: Vision | Mallinum: VFM-DA/4 | EAN: 5811699000005
Etävarastossa
Tuotetta on etävarastossamme. Toimitusaika noin 4-5 arkipäivää. Lisätietoja
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
Ilmainen toimitus
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
10,03
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
70,41
ilman ALV 56,10
Kokonaishinta sis. toimitus
70,41
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
Vision’s VFM-DA/4 Desk Arm ensures any workspace can enjoy both a clear-desk aesthetic and ergonomic working conditions without compromise. It raises the monitor off the desk surface or it can convert to a laptop or tablet shelf supporting clutter-free working and smaller desk areas.
Each user is able to easily adjust the monitor position to suit their needs, thanks to its innovative weight-compensating spring and tilt-rotate-swivel and height adjustment – ensuring all users benefit from a more comfortable and better working posture.
As well as high-end features the arm is manufactured from premium materials, but through careful design we have been able to keep it very affordable.
The desk arm fits any 10- to 27-inch flat-panel monitor with 100x100 rear mounting holes and a weight no greater than 7kg (15.4lbs).
Counter-Balancing Spring
We’ve swapped out the usual expensive gas struts that tension the desk arm for a spring mechanism. Not only is this much cheaper, it automatically counter-balances the load within a range of 2-7kg (4.4-15.5lbs).
Reduced Cost of Ownership
Load Adjustment
For lightweight loads like tablets, the bolts on the sides of the arm can be tightened down to stop the arm rising.
Laptop or Tablet shelf
Convert the mount into a convenient shelf for laptop or tablet using the provided extension strips with grippy silicon pads.
VESA Covers
For an enhanced finish in installations where the rear of the display is on view, hide the ugly VESA mounts using the provided covers - ideal for retail and public-facing environments.
SWL 7 kg
The VFM-DA/4 supports monitors with a maximum weight to 7kg (15.4lbs).
Fits Displays Up to 27-inch
Works for displays from 10 to 27-inch with 100x100 VESA mounting holes. It will also safely support any larger display with the same mounting points and SWL.
Fits Displays Up to 27-inch
Clips are provided for tidy cable routing.
Cable Management
All the parts required to clamp the arm to the edge of a table surface or bolt to the table are provided. (Note: grommet installation requires the drilling of holes in the table.)
Reduced Cost of Ownership
Its durable design ensures it will not need replacing for many years. It is easily and quickly installed, adjusted and moved. Together this delivers a very low cost of ownership.
Rotate to Portrait
Every user is able to position monitor easily positioned to suit using the almost endless tilt, rotation, swivel and height adjustment provided.
Each user is able to easily adjust the monitor position to suit their needs, thanks to its innovative weight-compensating spring and tilt-rotate-swivel and height adjustment – ensuring all users benefit from a more comfortable and better working posture.
As well as high-end features the arm is manufactured from premium materials, but through careful design we have been able to keep it very affordable.
The desk arm fits any 10- to 27-inch flat-panel monitor with 100x100 rear mounting holes and a weight no greater than 7kg (15.4lbs).
Counter-Balancing Spring
We’ve swapped out the usual expensive gas struts that tension the desk arm for a spring mechanism. Not only is this much cheaper, it automatically counter-balances the load within a range of 2-7kg (4.4-15.5lbs).
Reduced Cost of Ownership
Load Adjustment
For lightweight loads like tablets, the bolts on the sides of the arm can be tightened down to stop the arm rising.
Laptop or Tablet shelf
Convert the mount into a convenient shelf for laptop or tablet using the provided extension strips with grippy silicon pads.
VESA Covers
For an enhanced finish in installations where the rear of the display is on view, hide the ugly VESA mounts using the provided covers - ideal for retail and public-facing environments.
SWL 7 kg
The VFM-DA/4 supports monitors with a maximum weight to 7kg (15.4lbs).
Fits Displays Up to 27-inch
Works for displays from 10 to 27-inch with 100x100 VESA mounting holes. It will also safely support any larger display with the same mounting points and SWL.
Fits Displays Up to 27-inch
Clips are provided for tidy cable routing.
Cable Management
All the parts required to clamp the arm to the edge of a table surface or bolt to the table are provided. (Note: grommet installation requires the drilling of holes in the table.)
Reduced Cost of Ownership
Its durable design ensures it will not need replacing for many years. It is easily and quickly installed, adjusted and moved. Together this delivers a very low cost of ownership.
Rotate to Portrait
Every user is able to position monitor easily positioned to suit using the almost endless tilt, rotation, swivel and height adjustment provided.