EUR 0,00
(toimituskulut: 0,00)
Satel APS-724, Virtalähdeyksikkö, Valkoinen, Langallinen, 230 V, -10 - 55 °C, 101 mm
Tuotenumero: [7195907] | Valmistaja: SATEL | Mallinum: APS-724 | EAN: 5905033337022
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 7-9 työpäivää. Lisätietoja
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
Ilmainen toimitus
Bring - Toimitus huoltopisteeseen
Ilmainen toimitus
Bring - Kotiinkuljetus -arkisin.
10,03
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
278,12
ilman ALV 221,61
Kokonaishinta sis. toimitus
278,12
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
APS-724 is a switch-mode backup power supply for devices requiring 24 V DC, included in the alarm system or other installations.
The power supply is characterized by a high output current of 7 A, which determines the maximum current delivered by the power supply connected to the load. When the battery is being charged, this value is reduced by the maximum battery charging current: 6 A (powering devices) + 1 A (charging battery). Energy efficiency of the APS-724 power supply is up to 94%.
The system complies with EN 55011 Class B in terms of the level of conducted and radiated EMI. It also meets the requirements of EN 60950-1 safety standard.
Indisputable advantages of its structure include: a built-in interference suppression filter and an active system for power factor correction (PFC) - up to 0.99. This ensures very good and stable operating parameters, also in the presence of high fluctuations in the supply voltage.
Lead-acid batteries or other battery types with similar charging characteristics can be connected to the device. This enables uninterrupted operation of the system to be maintained - even for several hours - when the primary power source fails.
The power supply is characterized by a high output current of 7 A, which determines the maximum current delivered by the power supply connected to the load. When the battery is being charged, this value is reduced by the maximum battery charging current: 6 A (powering devices) + 1 A (charging battery). Energy efficiency of the APS-724 power supply is up to 94%.
The system complies with EN 55011 Class B in terms of the level of conducted and radiated EMI. It also meets the requirements of EN 60950-1 safety standard.
Indisputable advantages of its structure include: a built-in interference suppression filter and an active system for power factor correction (PFC) - up to 0.99. This ensures very good and stable operating parameters, also in the presence of high fluctuations in the supply voltage.
Lead-acid batteries or other battery types with similar charging characteristics can be connected to the device. This enables uninterrupted operation of the system to be maintained - even for several hours - when the primary power source fails.