EUR 0,00
(toimituskulut: 0,00)
Karlik DRO-2
Tuotenumero: [7307053] | Valmistaja: Karlik | Mallinum: DRO-2 | EAN: 5901832004202
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 7-9 työpäivää. Lisätietoja
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
7,02
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
10,03
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
47,59
ilman ALV 37,92
Kokonaishinta sis. toimitus
54,61
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
DECO mechanisms and frames are sold separately.
Electronic lightning controller with push and rotary button (dimmer switch) for LED lamps enables adjustment of LED dimmable light, halogen light supplied by electronic transformer and incandescent light. Use of the controller increases comfort and daily savings in electricity which consumption is proportionate to the light intensity. Electronic lightning controller with push and rotary button for LED lamps is an intelligent device, that can be programmed to be individually set according to minimal light level and operational mode. Controlling involves the use of potentiometer with switch. The controller is equipped with overload and short-circuit protection. In case of overload occurrence the controller will switch off automatically. Note!
The device does not cooperate with halogen light powered by magnetic transformer, e.g. toroidal one.
In case of light level adjustment of several light source, the same powers and bulb types shall be used. Note!
Connecting two regulators in a two-way system may damage regulators. More information in the DOWNLOADS section.
Electronic lightning controller with push and rotary button (dimmer switch) for LED lamps enables adjustment of LED dimmable light, halogen light supplied by electronic transformer and incandescent light. Use of the controller increases comfort and daily savings in electricity which consumption is proportionate to the light intensity. Electronic lightning controller with push and rotary button for LED lamps is an intelligent device, that can be programmed to be individually set according to minimal light level and operational mode. Controlling involves the use of potentiometer with switch. The controller is equipped with overload and short-circuit protection. In case of overload occurrence the controller will switch off automatically. Note!
The device does not cooperate with halogen light powered by magnetic transformer, e.g. toroidal one.
In case of light level adjustment of several light source, the same powers and bulb types shall be used. Note!
Connecting two regulators in a two-way system may damage regulators. More information in the DOWNLOADS section.