EUR 0,00
(toimituskulut: 0,00)
Mobeye CM4300, Water leak sensor, Musta, Sininen, Valkoinen, Ulkoinen, DC, 12 V, 24 V
Tuotenumero: [7503935] | Valmistaja: Mobeye | Mallinum: CM4300 | EAN: 8719324241557
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 5-6 työpäivää. Lisätietoja
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
Ilmainen toimitus
Bring - Toimitus huoltopisteeseen
Ilmainen toimitus
Bring - Kotiinkuljetus -arkisin.
10,03
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
308,40
ilman ALV 245,74
Kokonaishinta sis. toimitus
308,40
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
Mobeye WaterGuard
The Mobeye WaterGuard is an effective and user-friendly alarm device for detecting water-based liquids. In an alarm situation, it sends notifications via push message, telephone call, SMS or e-mail.
Warns of water leakage and helps prevent consequential damage.
The Mobeye WaterGuard monitors water leakage in the basement, pump house, boat, and other critical areas. The additional inputs can monitor a pump, fault signal and power supply. Operates on battery or external power.
Leakage sensor
The Mobeye WaterGuard (CM4300) has a leakage sensor to detect water-based liquids. As soon as the two pins feel water, an alarm is triggered. A message will go to the contacts via the built-in communication module. For monitoring a water level, we recommend the CM4300FS with float sensor.
Alarm messages
In the event of an an alarm, the Mobeye WaterGuard sends alarm notifications by app (IOS/Android), telephone call (voice message), text message and/or e-mail. The message includes the actual temperature. For the push messages there is a choice between an escalation plan or group message. With the escalation plan, the recipient can confirm the push message, so that the other contacts no longer receive the message. If none of the recipients confirms the push message, a call, SMS and/or e-mail will still be sent out. The number of contacts is unlimited.
External voltage vs battery powered
The Mobeye WaterGuard can run on batteries for a long time which makes it independent of an external power source. Optionally, a mains adapter is connected (12-24V DC). In this case, the power supply is also monitored. If there is outage, a message will be sent. The internal batteries ensure that the alarm device continues to work for a long time. The WaterGuard will continue to monitor the water level and input contacts and will still report alarms. Once the power restores a notification will be sent.
Potential-free alarm inputs
In addition to the leakage sensor, the Mobeye WaterGuard (CM4300) has two NO/NC inputs for the connection of alarm contacts and sensors. It also monitors the status of a device or external sensor, such as a water pump.
Network and SIM card
The Mobeye SIM card gives the device full functionality, including the use of the Mobeye Internet Portal and the app. With the Mobeye SIM card, communication takes place over the 4G LTE-M network with 2G as fallback. When you insert your own SIM card, the device works on 2G. Alarm messages are then sent via SMS and/or call to max. 5 telephone numbers.
The Mobeye WaterGuard is an effective and user-friendly alarm device for detecting water-based liquids. In an alarm situation, it sends notifications via push message, telephone call, SMS or e-mail.
Warns of water leakage and helps prevent consequential damage.
The Mobeye WaterGuard monitors water leakage in the basement, pump house, boat, and other critical areas. The additional inputs can monitor a pump, fault signal and power supply. Operates on battery or external power.
Leakage sensor
The Mobeye WaterGuard (CM4300) has a leakage sensor to detect water-based liquids. As soon as the two pins feel water, an alarm is triggered. A message will go to the contacts via the built-in communication module. For monitoring a water level, we recommend the CM4300FS with float sensor.
Alarm messages
In the event of an an alarm, the Mobeye WaterGuard sends alarm notifications by app (IOS/Android), telephone call (voice message), text message and/or e-mail. The message includes the actual temperature. For the push messages there is a choice between an escalation plan or group message. With the escalation plan, the recipient can confirm the push message, so that the other contacts no longer receive the message. If none of the recipients confirms the push message, a call, SMS and/or e-mail will still be sent out. The number of contacts is unlimited.
External voltage vs battery powered
The Mobeye WaterGuard can run on batteries for a long time which makes it independent of an external power source. Optionally, a mains adapter is connected (12-24V DC). In this case, the power supply is also monitored. If there is outage, a message will be sent. The internal batteries ensure that the alarm device continues to work for a long time. The WaterGuard will continue to monitor the water level and input contacts and will still report alarms. Once the power restores a notification will be sent.
Potential-free alarm inputs
In addition to the leakage sensor, the Mobeye WaterGuard (CM4300) has two NO/NC inputs for the connection of alarm contacts and sensors. It also monitors the status of a device or external sensor, such as a water pump.
Network and SIM card
The Mobeye SIM card gives the device full functionality, including the use of the Mobeye Internet Portal and the app. With the Mobeye SIM card, communication takes place over the 4G LTE-M network with 2G as fallback. When you insert your own SIM card, the device works on 2G. Alarm messages are then sent via SMS and/or call to max. 5 telephone numbers.