Liitinliuskat, liitinliuskat TE AMP AMPLIMITE Hardware 745403-8 TE Connectivity Sisältö: 1 kpl
FBAC4895-B52C-4E03-B099-A6A8F8B8017B Created with sketchtool. 706D6907-81E1-46A2-B8F9-7B702A1EF2C7 Created with sketchtool. 6A870209-E7F5-44F5-A66F-09E20C85A0DC Created with sketchtool. 0BB04D6C-A9AB-4913-BF4F-5A23954E68E1 Created with sketchtool. 501E26C7-66C1-4DAA-B740-6CFAF55A1B39 Created with sketchtool. C105F7D3-D5EE-43C9-9EE8-05CC42B296D4 Created with sketchtool. D94689D8-7CBB-41C8-AC06-F79D81FF82D5 Created with sketchtool. DA4C7ED9-2512-4D52-94F0-92800F2A6E04 Created with sketchtool. 42E133FD-828F-4CF4-A0BF-560014487A57 Created with sketchtool. F52D9745-4BFD-4506-BEEF-630FD09EF2D9 Created with sketchtool.
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 7-9 työpäivää. Lisätietoja
Toimitusvaihtoehdot  - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
7,02
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
10,03
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten: Tallenna
EUR 7,43
ilman ALV 5,92
Kokonaishinta sis. toimitus 14,45
AMPLIMITE D-Sub Connector Latching Blocks, Locking Posts, Keying Plugs, Gasket and Bushings
Accessories for AMPLIMITE series HDE, HDF, HDP and HD series d-sub connectors including locking post assemblies, latching blocks, and spring latches.
Stock number
680-9235
is a Keying Plug for use with size 20 sockets
Stock number
450-9365
is a 4-40 threaded Locking Post assembly
Stock number
717-4656
is a front panel Latching Block with M3 threaded hole
Stock number
450-9371
is a rear panel Latching Block with 4-40 threaded hole
Stock number
717-4634
is a front panel Latching Block with slot recess and through hole
Stock number
680-9392
is a rear panel Latching Block with slot recess and through hole
Stock number
450-9321
is a 2 piece Spring Latch
Stock number
717-4644
is an EMI RF Gasket, shell size 1
Stock number
782-9940
is a 4-40 threaded locking post kit
Stock number
782-1191
is a Slide Latch Clip with a 4-40 thread size for unfiltered mating half
Stock number
795-2292
is a set of 2 aluminium Stand-off Bushings with a 4-40 thread size
Stock number
798-1482
is a kit of 2 Latching Blocks with a 3 mm (0.12 inch) diameter through hole
Stock number
798-1498
is a plain Flat Washer size #4 (.219 and .125 inch diameters by .032 inch thick), Steel - Zinc plated clear chromate coating.
Stock number
822-5027
is a cord guard for 9 way AMPLIMITE plug or receptacle housings
TE Connectivity AMPLIMITE D-Subminiature Connectors