EUR 0,00
(toimituskulut: 0,00)
Qoltec 54432, LC/PC, Sininen, Hopea, Keltainen, Yksittäistila, 200 kpl, 20 mm, 100 mm
Tuotenumero: [7864457] | Valmistaja: Qoltec | Mallinum: 54432 | EAN: 5901878544328
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 7-9 työpäivää. Lisätietoja
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
Ilmainen toimitus
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
10,03
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
111,53
ilman ALV 88,87
Kokonaishinta sis. toimitus
111,53
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
FIBER OPTIC CONNECTOR
Fiber optic connectors are designed to connect optical fibers. They allow to switch and connect optical lines. Thanks to the highest quality optical connectors the lowest attenuation is guaranteed. Each connector is different, depending on the type of optical fiber and the size and polishing method of the ferrule. Ferrula is a tube, which is made of ceramic sinter and it is a cover and guide for optical fiber in connector.
LC/PC CONNECTORS
The advantage of LC connectors is their small size, which makes them suitable for use in areas that have a high density of switching fields. They also have a latching locking system, which prevents the connector from being accidentally pulled out. LC connectors are used in LAN, WAN and FTTD networks, on railroads, in telecommunication networks, in cable TV networks and in measurement technology. Nowadays, the reflective PC contact technique with fiber end faces allows to achieve the lowest possible loss at the optical connector, while maintaining high level of back reflection. In this type of connectors, back loss is not less than 40 dB. Maintaining such parameters requires high precision of the fiber front, its polishing and maintaining proper curvature of ferrule surrounding the fiber.
Fiber optic connectors are designed to connect optical fibers. They allow to switch and connect optical lines. Thanks to the highest quality optical connectors the lowest attenuation is guaranteed. Each connector is different, depending on the type of optical fiber and the size and polishing method of the ferrule. Ferrula is a tube, which is made of ceramic sinter and it is a cover and guide for optical fiber in connector.
LC/PC CONNECTORS
The advantage of LC connectors is their small size, which makes them suitable for use in areas that have a high density of switching fields. They also have a latching locking system, which prevents the connector from being accidentally pulled out. LC connectors are used in LAN, WAN and FTTD networks, on railroads, in telecommunication networks, in cable TV networks and in measurement technology. Nowadays, the reflective PC contact technique with fiber end faces allows to achieve the lowest possible loss at the optical connector, while maintaining high level of back reflection. In this type of connectors, back loss is not less than 40 dB. Maintaining such parameters requires high precision of the fiber front, its polishing and maintaining proper curvature of ferrule surrounding the fiber.