EUR 0,00
(toimituskulut: 0,00)
Meripihka 14-652-VDE, 200 mm, 34 g, Saksa
Tuotenumero: [7874960] | Valmistaja: Bernstein | Mallinum: 14-652-VDE | EAN: 4250838509596
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 5-6 työpäivää. Lisätietoja
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
7,02
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
10,03
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
7,78
ilman ALV 6,20
Kokonaishinta sis. toimitus
14,80
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
BERNSTEIN quality VDE screwdriver 100% Made in Germany. The protective-coated blade is made of a high quality chrome vanadium steel and hardened over its entire length, the tip is burnished. The ergonomically shaped VDE multi-component handle is slip-proof, impact-resistant and has a practical hanging hole.
Our VDE screwdrivers are under the control of the VDE test center. Each screwdriver of this series is individually tested according to the VDE guidelines DIN IEC 60900 / EN 60900 and approved for working under voltage up to 1000 volts. All insulations are REACH compliant and phthalate free. The quality is particularly evident in the manufacturing process of the blade. This is clamped in the quality test in a torque test rig and twisted to smooth breakage, this has to be done according to DIN in a very specific Newton meters range. Only a smooth break is safe. Inferior products can splinter or crack, which can be extremely dangerous.
Our VDE screwdrivers are under the control of the VDE test center. Each screwdriver of this series is individually tested according to the VDE guidelines DIN IEC 60900 / EN 60900 and approved for working under voltage up to 1000 volts. All insulations are REACH compliant and phthalate free. The quality is particularly evident in the manufacturing process of the blade. This is clamped in the quality test in a torque test rig and twisted to smooth breakage, this has to be done according to DIN in a very specific Newton meters range. Only a smooth break is safe. Inferior products can splinter or crack, which can be extremely dangerous.