EUR 0,00
(toimituskulut: 0,00)
Satel ETHM-A, Ilmoitusmoduuli, Hälytysjärjestelmä, Satel, INTEGRA, Vihreä, Seinä
Tuotenumero: [8216828] | Valmistaja: SATEL | Mallinum: ETHM-A | EAN: 5905033337183
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 7-9 työpäivää. Lisätietoja
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
Ilmainen toimitus
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
10,03
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
117,22
ilman ALV 93,40
Kokonaishinta sis. toimitus
117,22
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
ETHM-A is a universal monitoring module which can operate autonomously, as part of an intruder alarm system or in automation systems. The module allows transmission of information via the Ethernet network.
In intruder alarm systems, the module can be used for event reporting, when connected to an alarm control panel via its dialler. ETHM-A can also be connected to a control panel using suitably configured control panel outputs connected to the module inputs.
ETHM-A has 8 inputs which can be programmed as NO, NC or analogue to work with devices equipped with NO or NC outputs, analogue sensors or D/A converters. Additionally, it is equipped with a 1-Wire digital sensor bus and can be connected to max 8 detectors (e.g., temperature) with a maximum bus length of 30 m. In this way, the module can be used to collect and transmit various types of data within the IoT, e.g., current temperature, humidity level and others. ETHM-A can also transmit to the monitoring station events that have taken place in the alarm system (e.g., arming, alarms and others).
ETHM-A has 4 transistor outputs (OC). They can be controlled remotely, e.g., using the GX CONTROL mobile app, a computer with the GX Soft software installed or within the IoT.
The module can also be used to send PUSH notifications to mobile devices with the GX CONTROL app installed and via e-mail.
To program and configure the module, a PC with the GX Soft software installed is required. ETHM-A supports local connection (USB) or remote connection (Ethernet). The ETHM-A firmware can be updated remotely using the UpServ software.
In intruder alarm systems, the module can be used for event reporting, when connected to an alarm control panel via its dialler. ETHM-A can also be connected to a control panel using suitably configured control panel outputs connected to the module inputs.
ETHM-A has 8 inputs which can be programmed as NO, NC or analogue to work with devices equipped with NO or NC outputs, analogue sensors or D/A converters. Additionally, it is equipped with a 1-Wire digital sensor bus and can be connected to max 8 detectors (e.g., temperature) with a maximum bus length of 30 m. In this way, the module can be used to collect and transmit various types of data within the IoT, e.g., current temperature, humidity level and others. ETHM-A can also transmit to the monitoring station events that have taken place in the alarm system (e.g., arming, alarms and others).
ETHM-A has 4 transistor outputs (OC). They can be controlled remotely, e.g., using the GX CONTROL mobile app, a computer with the GX Soft software installed or within the IoT.
The module can also be used to send PUSH notifications to mobile devices with the GX CONTROL app installed and via e-mail.
To program and configure the module, a PC with the GX Soft software installed is required. ETHM-A supports local connection (USB) or remote connection (Ethernet). The ETHM-A firmware can be updated remotely using the UpServ software.