EUR 0,00
(toimituskulut: 0,00)
Hagor HA DH Duo S, 81,3 cm (32"), 127 cm (50"), 400 x 400 mm, 0 - 15°, -20 - 20°, Musta
Tuotenumero: [8958713] | Valmistaja: Hagor | Mallinum: 2706 | EAN: 4250058527066
Ikke på lager
Tuotetta ei ole varastossa. Lisätietoja
Loppuunmyyty
Tuotetta ei ole varastossa.
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
Ilmainen toimitus
Bring - Toimitus huoltopisteeseen
Ilmainen toimitus
Bring - Kotiinkuljetus -arkisin.
15,12
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
290,81
ilman ALV 231,72
Kokonaishinta sis. toimitus
290,81
Ilmoita minulle, kun tuotetta on jälleen tarjolla varastossa
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
HA DH Duo S
Dual ceiling mount
The HA DH Duo S is a ceiling mount for two screens „back-to-back“ with a screen diagonal of 32“ to 50“ | 81 – 127 cm. The installation can be done either in landscape or portrait format.
The VESA mounts are already included and support screens with min. VESA 100 x 100 up to max. 400 x 400 mm. The tilt angle of the TV holding fixture can be adjusted between -5° and +30° without tools, using the rotary handles on the side. The possible tilt angle depends on the size of the installed screens.
Thanks to the oblong holes on the side in the lower pipe segment, the TV holding fixture can be swiveled by ±15° with tools. This means that even slight differences in the case of, for example, a faulty drilling can be compensated. The ceiling distance can be varied in 100 mm steps between min. 438 and max. 738 mm. This information refers to the centre of the screen.
The cables are routed internally, hidden from view and unauthorized access.
The surfaces of the HA Duo S are finished with an impact and scratch resistant powder coating in black.
The max. load is 2x 35 kg.
Dual ceiling mount
The HA DH Duo S is a ceiling mount for two screens „back-to-back“ with a screen diagonal of 32“ to 50“ | 81 – 127 cm. The installation can be done either in landscape or portrait format.
The VESA mounts are already included and support screens with min. VESA 100 x 100 up to max. 400 x 400 mm. The tilt angle of the TV holding fixture can be adjusted between -5° and +30° without tools, using the rotary handles on the side. The possible tilt angle depends on the size of the installed screens.
Thanks to the oblong holes on the side in the lower pipe segment, the TV holding fixture can be swiveled by ±15° with tools. This means that even slight differences in the case of, for example, a faulty drilling can be compensated. The ceiling distance can be varied in 100 mm steps between min. 438 and max. 738 mm. This information refers to the centre of the screen.
The cables are routed internally, hidden from view and unauthorized access.
The surfaces of the HA Duo S are finished with an impact and scratch resistant powder coating in black.
The max. load is 2x 35 kg.