EUR 0,00
(toimituskulut: 0,00)
Goobay 61142, Musta, Ulkona, 98 mm, 110 mm, 104 mm, 130 g
Tuotenumero: [9305667] | Valmistaja: Goobay | Mallinum: 61142 | EAN: 4040849611421
Etävarastossa
Tuotetta on etävarastossamme. Toimitusaika noin 4-5 arkipäivää. Lisätietoja
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
7,02
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
10,03
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
24,01
ilman ALV 19,13
Kokonaishinta sis. toimitus
31,03
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
Angled Wall Mount for EV Type 2 Charging Cable
space-saving holder for the vehicle-side cable socket between charging processes
Wall brackets for charging cable sockets (IEC 62196 type 2) prevent the cable from being damaged when stored outside the charging process. Securely fastened to the wall, the holder protects the charging connector from dirt and damage that would occur if it were kept on the floor, e.g. in a garage. This helps to extend the lifetime of the charging cable and keeps the socket and cable clean.
- The charging cable holder securely keeps the plug off the floor between charging cycles to prevent dirt and damage to the connector.
- By covering the nozzle, the plug holder protects the Type 2 charging cable from dust, dirt and water ingress.
- The charging plug can be securely locked in place with just one hand and unlocked again from the dummy socket at the touch of a button.
- Easy to install on the wall of the house or garage, e.g. next to your wall connector, using the dowels and screws supplied (charging cable not included)
space-saving holder for the vehicle-side cable socket between charging processes
Wall brackets for charging cable sockets (IEC 62196 type 2) prevent the cable from being damaged when stored outside the charging process. Securely fastened to the wall, the holder protects the charging connector from dirt and damage that would occur if it were kept on the floor, e.g. in a garage. This helps to extend the lifetime of the charging cable and keeps the socket and cable clean.
- The charging cable holder securely keeps the plug off the floor between charging cycles to prevent dirt and damage to the connector.
- By covering the nozzle, the plug holder protects the Type 2 charging cable from dust, dirt and water ingress.
- The charging plug can be securely locked in place with just one hand and unlocked again from the dummy socket at the touch of a button.
- Easy to install on the wall of the house or garage, e.g. next to your wall connector, using the dowels and screws supplied (charging cable not included)