Extralink 1 PORT GIGABIT POE INJECTOR WITH 10-30V TO 48V INVERTER, Hurtigt ethernet, Gigabit Ethernet, 10,100,1000 Mbit/s, IEEE 802.1af, IEEE 802.3at, Cat5e, Cat6, Cat6a, lajittelu, Linkki
FBAC4895-B52C-4E03-B099-A6A8F8B8017B Created with sketchtool. 706D6907-81E1-46A2-B8F9-7B702A1EF2C7 Created with sketchtool. 6A870209-E7F5-44F5-A66F-09E20C85A0DC Created with sketchtool. 0BB04D6C-A9AB-4913-BF4F-5A23954E68E1 Created with sketchtool. 501E26C7-66C1-4DAA-B740-6CFAF55A1B39 Created with sketchtool. C105F7D3-D5EE-43C9-9EE8-05CC42B296D4 Created with sketchtool. D94689D8-7CBB-41C8-AC06-F79D81FF82D5 Created with sketchtool. DA4C7ED9-2512-4D52-94F0-92800F2A6E04 Created with sketchtool. 42E133FD-828F-4CF4-A0BF-560014487A57 Created with sketchtool. F52D9745-4BFD-4506-BEEF-630FD09EF2D9 Created with sketchtool.
24/7 Asiakaspalvelu | Saa vastaus saman tien!
0
0
Image Search

EUR 0,00

(toimituskulut: 0,00)

0
  1. Tietokonetarvikkeet
  2. Verkko
  3. Muut lisätarvikkeet

Extralink 1 PORT GIGABIT POE INJECTOR WITH 10-30V TO 48V INVERTER, Hurtigt ethernet, Gigabit Ethernet, 10,100,1000 Mbit/s, IEEE 802.1af, IEEE 802.3at, Cat5e, Cat6, Cat6a, lajittelu, Linkki

Tuotenumero: [9569534] | Valmistaja: EXTRALINK | Mallinum: EX.14671 | EAN: 5903148914671
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 7-9 työpäivää. Lisätietoja
Toimitusvaihtoehdot  - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
7,02
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
15,12
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten: Tallenna
EUR 19,78
ilman ALV 15,76
Kokonaishinta sis. toimitus 26,80
Lue lisää teknisistä tiedoista
Extralink poe injector
The Poe injector allows you to bring power to your 10/100/1000mbps network over CAT5e, CAT6 or CAT6A Ethernet cable. The power source can be any power supply from 10V to 30V and the output voltage of the injector is 48V. The poe adapter can be powered from the DC jack 5.5/2.1 mm connector - or from the RJ45 plug pins - 4.5 (plus) and 7.8 - (minus). Thanks to the poe injector, a battery (12V or 24V) or passive PoE (10V-30V) can be used to power the 48V device.
When connecting power to the DC jack 2.1mm input - the power will be isolated from the male RJ-45 connector - so it can be connected to a switch or router. The 48V output voltage is delivered to pins 3.6 (plus) and 1.2 - (minus) of the RJ-45 female jack to power any 802.3af device. This converts both the voltage that the receiving device is powered by and the pins on which the power over ethernet operates.