EUR 0,00
(toimituskulut: 0,00)
Levenhuk Wezzer Teo TH40 Lämpötilamittari Levenhuk Wezzer Teo TH40 Thermohygrometer
Tuotenumero: [9576889] | Valmistaja: Levenhuk | Mallinum: 81388 | EAN: 5905555016597
Ikke på lager
Tuotetta ei ole varastossa. Lisätietoja
Loppuunmyyty
Tuotetta ei ole varastossa.
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
7,02
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
10,03
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
47,24
ilman ALV 37,64
Kokonaishinta sis. toimitus
54,26
Ilmoita minulle, kun tuotetta on jälleen tarjolla varastossa
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
The Levenhuk Wezzer Teo TH40 Thermohygrometer is a stylish gadget for home or office use. It has a contrasting backlit color screen and is equipped with a wireless thermo-hygro sensor that can be placed up to 80 meters away from the main unit. In addition to measuring temperature and humidity, the device also displays the time, date, day of the week, weather trends, and weather forecast. There is also an alarm clock with a snooze option.
The screen is divided into four blocks. At the top, you can see the weather forecast in colorful graphics: "sunny", "variable cloudiness", "cloudy", and "rain". Right below that, there is a block where you can see the temperature and humidity measurements from the sensor, and then below that you can see the same readings but coming from the main module. The lowest block shows a clock with a calendar and an alarm. The blocks are color-coded, and the information can be easily seen.
The control buttons are placed on the back panel, except for the one that turns on the backlight and snoozes the alarm. The device is designed for desktop placement only: There is no wall mount hole. The sensor has no screen and can be installed in two ways: on any horizontal surface or with self-tapping screws via a standard wall mount hole on the back cover.
The main module can be powered by batteries or AC power and the sensor only works with batteries.
It is recommended to use alkaline batteries for the remote sensors.
The screen is divided into four blocks. At the top, you can see the weather forecast in colorful graphics: "sunny", "variable cloudiness", "cloudy", and "rain". Right below that, there is a block where you can see the temperature and humidity measurements from the sensor, and then below that you can see the same readings but coming from the main module. The lowest block shows a clock with a calendar and an alarm. The blocks are color-coded, and the information can be easily seen.
The control buttons are placed on the back panel, except for the one that turns on the backlight and snoozes the alarm. The device is designed for desktop placement only: There is no wall mount hole. The sensor has no screen and can be installed in two ways: on any horizontal surface or with self-tapping screws via a standard wall mount hole on the back cover.
The main module can be powered by batteries or AC power and the sensor only works with batteries.
It is recommended to use alkaline batteries for the remote sensors.