EUR 0,00
(toimituskulut: 0,00)
Jäätyökalut Modding Cutter, sakset
Tuotenumero: [9754069] | Valmistaja: Alphacool | Mallinum: 11641 | EAN: 4250197116411
Etävarasto (16-23 päivää)
Tuotetta on etävarastossa. Toimitusaika 16-23 arkipäivää. Lisätietoja
Toimitusvaihtoehdot - Valitaan kassalla
Budbee Laatikko - Nouda valitsemastasi laatikosta!
7,02
Bring - Toimitus huoltopisteeseen
7,02
Bring - Kotiinkuljetus -arkisin.
10,03
Toimituskulut on laskettu vastaanottajan postinumeron perusteella:00180 - Helsinki Vaihda postinumero
Syötä postinumero toimitusta varten:
EUR
22,52
ilman ALV 17,94
Kokonaishinta sis. toimitus
29,54
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
The Alphacool Eistools Modding Cutter is a versatile tool that can be used for many jobs. You can cut the Alphacool Eistubes PETG HardTubes as well as standard soft tubing. Thanks to the adjustable angle, the Eistools Modding Cutter can also be used for other jobs whilst modding.
PETG Tube No Longer Sawed?
The Alphacool PETG Eistubes are relatively soft for HardTubes and can therefore not only be bent at relatively low temperatures, they can also be cut perfectly with the Eistools Modding Cutter. The tube is placed on the protractor and then simply cut as if with scissors. The procedure is just as easy with normal hoses.
But What's with the Angles?
Those who want to up their game with some modding will not only use HardTubes, but also change various things on the case and other components. There are a lot of things that must be cut. Cable sleeving, insulation, LED Strips and various caps to cover certain parts in the PC and much more. Here one often needs perfect angled cuts.
How to Use the Angle?
The support surface is generously chosen and the angle can be adjusted up to a cutting edge of 45°. This is done in 15° steps, whereby the angle always engages cleanly and thus remains in position.
The Blade Is Blunt, What Now?
It is important to keep the blade sharp, so of course, you can change the blade. All you need to do is loosen a screw on the side. An 8 mm open-end wrench is recommended. Then you can replace the blunt blade with a new one. The replacement blades are of course also available from Alphacool. The replacement blades for the Eistools Modding Cutter can be found under manufacturer number 11642.
The Eistools Modding Cutter is a multi-use tool that modders and watercoolers should not be without. It is versatile and makes cutting the Eistube PETG HardTubes to size a breeze.
PETG Tube No Longer Sawed?
The Alphacool PETG Eistubes are relatively soft for HardTubes and can therefore not only be bent at relatively low temperatures, they can also be cut perfectly with the Eistools Modding Cutter. The tube is placed on the protractor and then simply cut as if with scissors. The procedure is just as easy with normal hoses.
But What's with the Angles?
Those who want to up their game with some modding will not only use HardTubes, but also change various things on the case and other components. There are a lot of things that must be cut. Cable sleeving, insulation, LED Strips and various caps to cover certain parts in the PC and much more. Here one often needs perfect angled cuts.
How to Use the Angle?
The support surface is generously chosen and the angle can be adjusted up to a cutting edge of 45°. This is done in 15° steps, whereby the angle always engages cleanly and thus remains in position.
The Blade Is Blunt, What Now?
It is important to keep the blade sharp, so of course, you can change the blade. All you need to do is loosen a screw on the side. An 8 mm open-end wrench is recommended. Then you can replace the blunt blade with a new one. The replacement blades are of course also available from Alphacool. The replacement blades for the Eistools Modding Cutter can be found under manufacturer number 11642.
The Eistools Modding Cutter is a multi-use tool that modders and watercoolers should not be without. It is versatile and makes cutting the Eistube PETG HardTubes to size a breeze.